40hp Yanmar® 3JH40 diesel three-cylinder engine, fresh water cooled, rubber isolation mounts on reinforced fiberglass bed with integral oil pan; straight shaft drive for simplicity, reliability and durability; packing box, shaft zinc; two-blade prop (feathering option available). Mechanical fuel pump, 110 amp Balmar® alternator. A 3-bladed fixed prop (feathering prop optional), Racor® fuel filter with water separator mounted for easy access. Jacketed fuel lines with swedged and threaded fittings, intake strainer. Extensive sound control with premium lead-lined insulation, gasketed access doors and panels; service access through side doors and removable forward panel.

  • Engine instrument panel with tachometer, hour meter and engine monitoring system on central cockpit console. Three (3) premium AGM 12 volt batteries dedicated to house, plus one (1) dedicated to engine start. Parallel position on battery switch for emergency starting.
  • Deluxe master electrical panels outboard of nav seat with AC and DC gauges and breakers, battery test system, reverse polarity indicator; separate battery switch under port settee with controls for electric bilge pump (high water alarm light at helm); LPG solenoid control in galley.

  • 30 amp dockside AC power system with ELCI ground fault inlet protection breaker and one (1) 50-foot shore power cord. Numerous outlets, all with GFCI protection.
  • Mastervolt three stage battery charger temperature compensating, UL® listed.
  • ProMariner® ProSafe galvanic isolator
  • Electrical DC grounding/bonding system for rig and all underwater metals.
  • UL® Listed marine pre-tinned 600V color coded and numbered wiring throughout.
  • Pressure water system with hot and cold service to galley, head and cockpit shower. UL® listed six (6) gallon water heater with engine heat exchanger, insulated hot water hoses throughout. Dedicated head, sink/shower drain sump with strainer.
  • 110 gallons water in multiple tanks with distribution manifold; 25 gallon holding tank; tanks made of heavy wall seamless linear polyethylene. Water tanks meet FDA acceptance for potable water; holding tank meets USCG regulation 33 CFR 159.12. S/S deck fills; remote tank level gauge; s/s deck pump out fitting for holding tank

  • Fuel tank of welded marine grade aluminum (5052-H32) with shut off valve, s/s deck fill, tank and remote mounted gauges. Pre-plumbed for additional pickup and return for (optional) generator and/or cabin heater installation.
  • Electric bilge pump with interior and cockpit console control; manual bilge pump with interior mount
  • 12V outlets at nav station and cockpit console for chargers, accessories.
  • Masthead anchor light, foredeck steaming light and COLREGS compliant nav lights.
  • Marelon® flush thru-hull fittings with Marelon® seacocks on below water openings.
  • Mast prewired for VHF antenna; messengers pre-run for pulling additional wire in yacht.